Barracuda Networks Firewall X100 Guide de l'utilisateur Page 107

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 142
  • Table des matières
  • DEPANNAGE
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 106
6.
7.
8.
1.
2.
3.
4.
5.
6.
7.
Remote Address
Enter .213.47.0.253
The WAN IP address of location 2.
Remote Networks
Enter ./2410.10.20.0
The .remote LAN
Specify these authentication settings:
Setting Value
Authentication Select . Shared Passphrase
Passphrase
Enter the shared secret.
Click .Add
Step 2. Create the IPsec Tunnel on the Barracuda Firewall at Location 2
To create the IPsec tunnel:
Log into the Barracuda Firewall at Location 2.
Go to the page.VPN > Site-to-Site Tunnels
In the Site-to-Site IPSec Tunnels section, click Add .
Enter a Name for the new VPN tunnel.
In the and sections, specify these settings:Phase 1 Phase 2
Setting Value
Encryption Phase 1 & 2 Select . AES256
Hash Method Phase 1 & 2 Select .MD5
DH Group Phase 1 & 2 Select .Group 1
Lifetime Phase 1
Enter .28800
Lifetime Phase 2
Enter .3600
Specify these network settings:
Setting Value
Local End Select . Passive
Local Address
Select one of the available IP addresses. If you have dynamic
ISPs configured, select .Dynamic
Local Networks
Enter ./2410.20.10.0
The network address for the locally configured LAN.
Remote Address
Enter .213.47.0.253
The WAN IP address of location 1.
Remote Networks
Enter ./2410.10.10.0
The .remote LAN
Specify these authentication settings:
Setting Value
Vue de la page 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 141 142

Commentaires sur ces manuels

Pas de commentaire